Riser Monitoring Solution RMS
Unique value proposition (UVP)
Riser Monitoring Solution (RMS)
RMS is a solution for monitoring the integrity of steel catenary riser. The solution incorporates motion and strain sensors to monitor the integrity of the steel catenary risers including loads, motions and fatigue in the riser as well as the integrity of the riser flex joint when this is relevant.
The riser monitoring solution is based on live riser monitoring data being fed into a digital twin of the risers. The digital twin is hosted and operates on 4insight®. These virtual risers will be fed with data from actual sensors installed on the FPSO and risers.
The digital twin has an optional prediction module that enables the system to forecast riser loads or motions and estimate the remaining service life of each riser using the measured riser responses combined with weather statistics and other parameters that may influence the fatigue damage accumulation, e.g. riser pressure.
Key Benefits
- The digital twin will be a hybrid model of the risers were an analytical model is continuously fed with measurement data from the installed sensors. The digital twin model will allow the system to estimate with high accuracy loads and stresses at any pre-defined location along the riser.
- Own monitoring dashboard All risers will have their own monitoring dashboard based on their own digital twin which will as a minimum be trained on FPSO motions and correlation between measured response and design model response for the risers that are being instrumented.
- Connecting SMS Gateway™ Immediate live data transfer from the sensors below the stress joint of risers will be connected to the SMS Gateway™. This sensor is also designed to work as a hub for collecting and streaming data from multiple sensors to 4Insight.
Other technologies by this company
Offshore Wind Engineering
Pipeline Integrity Management
+4 more categorizations
Annulus Monitoring (AMOS™)
Condition monitoring inspection services
+3 more categorizations
Portable Annulus Tester PAT™
Well engineering, operation and management · Drilling services
+3 more categorizations
4insight® Drilling
Structural Health Monitoring (SHM)
+1 more categorization
Cable Motion Monitoring
Subsea and marine operations
+1 more categorization
4insight® Marine Operations
Asset integrity management
+1 more categorization
4insight® Subsea Asset Integrity
Umbilicals, risers, flowlines and pipelines · Flexibles, static and dynamic lines
+1 more categorization
FlexShare™
Well engineering, operation and management
+1 more categorization
Conductor analysis
Subsea equipment and services
+1 more categorization
Well Access Solutions
Subsea equipment and services · Well control equipment, drilling risers, christmas trees and accessories
Subsea Wellhead Integrity Monitoring (SWIM™)
Monitoring Solution Specification
Subsea and marine operations
4insight Marine Operations DynOps
Offshore Wind Sensor Monitoring
Condition monitoring inspection services
ValveTrack
Cable Design
Subsea and marine operations
4insight® Drilling DynOps
Digital twin for offshore wind
Concept Development
Company contact
TRL scale
Categories
No categories.
References
© Norwegian Energy Partners All Rights Reserved